Description
Viessmann Vitocal 150-A Standard Air Source Heat Pump 10kW (Z032189)
Type A10 230 V105
Monoblock heat pump with indoor and outdoor units:
- For room heating/cooling and DHW heating, up to 70 °C flow temperature
- Monoblock indoor unit with heat pump control unit
- High efficiency circulation pump for the secondary circuit
- 4-3-way diverter valve and safety assembly
- Integral instantaneous heating water heater
- Integral buffer cylinder and overflow valve
Heat pump control unit for weather-compensated operation
- 7-inch colour touchscreen with energy cockpit
- WiFi hotspot for local service without internet connection
- Internet connection via WiFi
- Control of a DHW circulation pump
- Control of an instantaneous heating water heater
- Active cooling control function
- Integral heat meter
- Setting of low-noise mode for the outdoor unit
- Optimised energy management, e.g. in conjunction with photovoltaic system, power storage system
- Display of energy flows in the ViCare app and ViGuide
AF Version:
- With integral electric ribbon heater in the condensate pan
- Permissible operating pressure: Heating water 3 bar (0.3 MPa)
- Colour of indoor unit: Vitopearlwhite
- Colour of outdoor unit: Vitosilver
- Low running costs thanks to high COP (coefficient of performance) to EN 14511: Up to 5.0 at A7/W35
- Output control and DC inverter for high efficiency in partial load operation
- A maximum flow temperature of up to 70 °C at an outside temperature of -10 °C enables use in both new build and modernisation projects.
- Self-optimising control of the flow rate via Viessmann Hydro AutoControl
- Environmentally responsible, natural refrigerant R290 with a particularly low GWP of 0 (GWP = Global Warming Potential)
- Convenient reversible design for heating and cooling
- Especially quiet operation thanks to Advanced Acoustic Design (AAD)
- Web-enabled through integral WiFi or service link
- Operation, optimisation, maintenance and service via ViCare app and ViGuide
- Guided commissioning via ViGuide
Standard delivery:
Complete heat pump in monoblock version, comprising an indoor and outdoor unit.
Indoor unit:
- Integral 4/3-way valve for central heating/DHW heating/bypass
- Integral high efficiency circulation pump for the secondary circuit
- Integral instantaneous heating water heater
- Integral 16 litre buffer cylinder
- Integral safety valve and digital pressure gauge
- Weather-compensated heat pump control unit with outside temperature sensor
- Flow sensor
- Wall mounting bracket, standard connection pipes
- 10 l diaphragm expansion vessel
Outdoor unit:
- Inverter-controlled compressor, 4-way diverter valve, electronic expansion valve, evaporator, condenser, EC fan
- Factory-filled with refrigerant R290
- Heating water filter upstream of condenser
- Transport aid for outdoor unit
- AF version: With integral electric ribbon heater for the condensate pan
Important Notes
- Heat pumps must be commissioned by Viessmann Technical Service or a specialist heat pump contractor certified by Viessmann
- A hydraulic connection set must also be ordered to install the appliances.
- If the heat pump is being installed to modernise a heating system, a dirt separator with magnet is essential.
